Öffnen Sie den Verschluss an allen

Öffnen Sie den Verschluss an allen zwölf Lichtleiterbuchsen der LightNeedle-Sonde nach oben.

Stecken Sie den Lichtleiter mit der Nadelnummer „1“ in die Buchse „1“ und stecken Sie das Kabel bis zum Anschlag rein.

Drücken sie den Verschluss nach unten, bis er in der mittleren Stellung einrastet.

결과 (영어) 1:

Open the fastening at all twelve light head jacks of the LightNeedle probe upward. Insert the light guide with the needle number "1" in the "1" and put the cable until it stops. Press the lock down until it snaps into the middle position.

결과 (영어) 2:

Open the shutter at all twelve fiber optic connectors of LightNeedle probe upward. Insert the light guide with the needle number "1" in the bush "1" and insert purely the cable until it stops. Press the latch down until it snaps in the middle position.

결과 (영어) 3:

Open the latch on all twelve Lichtleiterbuchsen Needle-Sonde the light up.

Plug in the optical fiber with the needle number was sometimes partly not visible " 1" in the jack " 1" and plug the cable up to the stop.

Push the latch down until it snaps into place in the center position.